Advantage: 1. The installation of moisture-proof and thermal insulation layer can better protect the motor and battery, increase the service life of the electric forklift, and effectively protect the hydraulic system from working normally. 2. The energy-saving oil pump is 30%, which increases the cargo load and is more safe and reliable. High configuration, high performance, low fuel consumption
Some words about our forklift
2. High performance AC drive motor is mounted parallel to the frame width allowing the battery compartment to positioned lower creating a lower center of gravity to enhance stability.
3. The truck is equipped with AC type drive, pump and steering motors providing high torque performance and reduced maintenance.
4. Superior quality I beam and C channel construction creates a robust, rigid mast eliminating deflection for maximum durability and performance.
5. Large grab handle and low step height allows easy operator access-egress to the operator's compartment. The premium suspension seat with fully adjustable forward, aft and lumbar positions allow added comfort for various sized operators. Forward right hand hydraulic control levers are ergonomically positioned for easy reach permitting one hand multi functions. Large floor space with common automotive pedal arrangement provides precise acceleration and braking performance.
6. The hinged battery compartment cover is lightweight and easy to operate. The electrical control panel and related equipment is located inside the counterweight providing easy access and is protected from floor debris, contaminants and moisture.
| Model | CPD20 | |
| Power Type | accumulator | |
| rated load lifting capacity | 2000kg | |
| Load centre distance | 500mm | |
| driving style | Sit down | |
| length | with fork | 3290mm |
| without fork | 2210mm | |
| wideth | 1100mm | |
| height | Do not raise the mast height | 2010mm |
| Overhead guard height | 2000mm | |
| Max height at working | 4110mm | |
| Distance from seat surface to top guard frame | 980mm | |
| wheel base | 1520mm | |
| front overhang | 370mm | |
| rear overhang | 380mm | |
| front wheel track | 904mm | |
| rear wheel track | 958mm | |
| minimum ground clearance | 110mm | |
| Standard lifting height | 3000mm | |
| free lifting height | 0mm | |
| Fork adjustment range | 260-1100mm | |
| minimum turning radius | 2100mm | |
| Minimum right-angle channel width(1100*1100 pallets) | 3670mm | |
| Gantry angle (front/rear) | 5/10° | |
| Maximum lifting speed without load | 325mm/s | |
| Maximum lifting speed with full load | 250mm/s | |
| Maximum operating speed without load | 15Km/h | |
| Maximum operating speed with full load | 14Km/h | |
| Max gradeability with full loading | 15% | |
| Weight unladen | 2820 Kg | |
| Number of wheels = driving wheels/steering wheels | 2/2 | |
| Tyre type (front/rear) | Pneumatic tyre/pneumatic tyre | |
| tyre size(front) | 6.50-10 | |
| tyre size(rear) | 5.00-8 | |
| Brake/driving brake | Foot Brake | |
| parking brake | Hand Brake | |
| Battery voltage/capacity | 80V/105Ah | |
| drive motor power | 8Kw | |
| Oil pump motor power | 14Kw | |
| fork length | 1070mm | |
According to demands, can be matched with different accessories
Operator Visibility
Hosing and cylinders in mast have been repositioned to produce maximum operator visibility.
Arc shape of the overhead guard and longitudinal bars allows operator to safely see raised loads.
Operator Compartment
More space and foot room plus increased visibility through mast and overhead guard contribute to operator efficiency and safely.
Adjustable grammar seat w/arm rests and OPA(Operator Presence Alarm) combined with smaller diameter steer wheel promotes greater comfort.
Rear handle w/horn button used when driving in reverse.
Enter/exit operator compartment from both side.
Tilt steering column.
Efficiency
Small turning radius for better maneuverability.
Multi speed selection function for various work conditions and applications.
Faster lift and lower speeds.
36 volt with 48 volt option (AC Drive and Pump Motors).
Full led light package.
ZAPI MOSFET electronic travel and lifting controller.
Automatic deceleration while steering.
Energy Efficiency
Optimized hydraulic system promotes greater energy efficiency and lower consumption.
LED lights are standard equipment.
Rear handle w/horn button promotes greater safety when operator is traveling in reverse.
Ratchet type hand-brake for ease of operation.
Entry and exit of operator's compartment from both sides.
Optimized design of key components including frame, mast, overhead guard and steer axle enhance this forklifts overall safety and reliability.
Removable side and rear panels provide easy access to key components (pump motor, electric panel and controllers).
Removable floor board for easy access to drive motor and transaxle.
Easy access to break fluid reservoir.
Product Features
Sustainable energy recovery technology
low maintenance cost
soft sound
zero emission
Passed ISO international system
EU CE certification
The quality is guaranteed, and the export is unimpeded
Shandong Mingyu heavy industry machinery co.,ltd. Shandong Zhuogong Machinery equipment Co.,Ltd. Laizhou Zhuo Kun Import And Export Trading Co.,Ltd.(MYZG) was founded in 1996. Since then, MYZG has stood at the forefront of the Chinese small heavy machinery industry and developed into one of the most influential, and the most competitive enterprise groups with the complete product varieties and series. Every machine produced by Mingyu has to undergo several rigorous tests, and it can be finally delivered to customers only after all tests are completed and qualified.
After sales service
MYZG always treat after-sale service as important as sale.
Nowadays more than 100 agents around the world can supply MYZG professional after-sale service.
All the product of MYZG supplied with one year or 2000 working hours (which occurs first) period quality warranty.
Detail clauses and policies please check our website and product certificate.
In terms of production management,we have professional training and learning and modern management mode,every worker and manager masters the most popular manufacturing and management concepts.The whole production process is controlled by ERP system,from the smallest stainless steel part, to the patented diamond shaft,the most advanced anti-corrosion technology.
MYZG machines are exported all over the world,about more than 130 countries.We use brand engine, the spare parts are easy to get,and the engine can be changed to many brand such as Quanchai,Yunnei,Deutz,Cummins, Mitsubishi,Changchai, Xinchai,Kubota,Yanmar ,Isuzuetc.
MYZG have perfect after-sales service,and provide one year warranty .Our price is more competitive and the good service well received by customers.
Other model options can be selected
1. What Certificate do you have?
MYZG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
MYZG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3. How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6. What is your lead time?
It depends on the order quantity
