Futon Small Truck Sprinkler 5000L Water Tank Truck

Product Name: Futon Small Truck Sprinkler 5000L Water Tank Truck

Category: Water Truck

 

Standardized assembly line production, new appearance, modular design, full assembly without welding, 14 processes, the whole process can be completed in 90 minutes.
The tank body adopts automatic assembly line production technology: unloading, automatic welding of panels, head spinning, tank body one-time canning, ring-shaped automatic welding and other domestic advanced production processes.
A special customized high-power water pump is used, which has the characteristics of excellent performance, reliable operation, high efficiency, large flow, etc. The front rush can reach 8 lanes in both directions, the rear sprinkler can reach 4 lanes in both directions, and the anti-aircraft gun can reach a maximum range of 40 meters.
The water inlet pipe adopts 89 pipes with large water inlet, saving water adding time and promoting work efficiency.
The tank body and the subbeam are connected by connecting plate bolts. When the vehicle encounters bumps and poor road conditions during driving, the tank body and the subbeam are not easy to produce unsafe factors such as displacement, and have stronger safety and firmness.
The tank body and the water inlet and outlet are connected with Φ89 hose to reduce the damage to the pipeline and the auxiliary beam caused by friction during driving.
The connection between the tank body and the main beam is double-supported, with stronger support and higher safety.
There are two drainage outlets at the bottom of the tank body, which can better drain the remaining water inside the tank body in winter to prevent freezing and cracking.
The manhole is moved back and the tank guardrail is shortened, and a ladder is added to the entrance to facilitate the inspection of the tank.
The rear platform is connected with a connecting plate, and the platform surface is a punching platform to enhance the load-bearing capacity, non-slip and not easy to deform.
Acrylic plexiglass hollow bright tube, beautiful and practical; the flange seal is an O-ring, which is more sealed and more durable.
The whole vehicle tank water tank has 2-3 chambers, and there is a through hole at the lower end of the partition, with a wave-breaking plate inside to reduce the impact of the liquid in the tank during driving.
The side protection round pipe connection is a bending part connection to improve the firmness coefficient.
The electrophoresis process is adopted, and the coating has high transparency and fullness, with special gloss and transparency, three-dimensional effect, more beautiful and durable. Using powder spraying technology, 100-300μm coating can be applied in one coating, which is durable.

Others: