Please note :
We have almost 30 years experience in ptreol station market and post sale service support.
We are professional manufacturer of vapour recovery system, nozzles,flow meters, pumps for fuel dispensers, breakaways and swivels, etc.
We are factory in Wenzhou, China.
Cordially welcome to visit our factory!
Specification
The TDW-BT120 pump is composed of an aluminum body to which the filter housing, the pump and the electronic motor are connected.
1. Non-return valve integrated in the filter.
2. Fuel filter consisting of a filtering cartridge in synthetic resin with stainless steel wire gauze.
3. Self-priming blade rotary volumetric pump.
4. Centrifugal air separator composed of two concentric pipes, the internal one allows gases separated from the liquid part to be collected.
5. By pass valve equipped with a device for limiting and regulating pump delivery pressure.
6. Air separator drainage reflux chamber equipped with a float valve allowing drainage of the liquid part on reaching a pre-established level, and with a vent for evacuating the air separated from the liquid.
Features and Benefits:
1. Reduced number of components
2. Easy maintenance
3. Reduced dimensions and weight
4. No belts or pulleys in motor-pump connection
5. Filter flanged to the main body
6. Wide filtering surface
7. Compliance with OIML Standards
8. 100% Factory tested
Technical Specifications | |
Working Pressure | ≤0.3 Mpa |
Flow rate | 90-120L/m |
Vacuum | ≥0.06Mpa |
Motor Power | 0.75KW |
Motor Speed | 960rpm |
Rated Current | 2.3A |
Noise | ≤72dB |
Suction Pipe Section | 1-1/2" |
Dimension | 360mmx320mmx300mm |
Net Weight | About 15KG |
1- Could you develop our own design? Yes
2- The fuel nozzle including swivel? Yes
3- Can we visit your factory? Yes
4- Could you send the sample for testing? Yes
5- Could you offer door to door service? Yes
