Model NO.
GY681A
Size
2-6 Compartments
Working Pressure
0.5~0.8MPa
Working Temperature
-30c~+70c
Connecting Air Pipe Diameter
6mm
Transport Package
Fuel Tanker Pneumatic Combination Button
Specification
Fuel Tanker Pneumatic Combination Button
Trademark
DESEINOR
Origin
China
HS Code
8708996000
Production Capacity
100000
Capacity:
Fuel Tanker Pneumatic Combination Button
Shape:
Fuel Tanker Pneumatic Combination Button
Mounting Type:
Fuel Tanker Pneumatic Combination Button
Position:
Fuel Tanker Pneumatic Combination Button
Material:
Metal
Nombre:
Fuel Tanker Pneumatic Combination Button
Pneumatic Switch Controller (Fuel Tank Truck Aluminum Pneumatic Control Block Push Button For 2 -6 Compartments Oil Tanker Huate - DESEINOR) Penumatic control block is mainly composed of main control valve, sub control valve, pressure gauge, air source screen, panel and so on. When the air source reach to the working pressure and main control valve pressed, the air source screen will turn green, then the sub control valves start working. When the main control valve colsed, the sub control valves will be closed too. It can connect to remote shutoff switch to close the valve in remote way.
Specifications | |||
Nominal diameter | 2-6 Compartments | ||
Working pressure | 0.5~0.8Mpa | ||
| Connecting Air Pipe Diameter | 6mm | ||
Material | Aluminum | ||
Features
Combination Switch Technical Date:
1. Connecting Air Pipe Diameter: 6mm
2. Working Pressure: 0.5~0.8Mpa
3. Working Temperature : -30ºC`~+70ºC
Notes:
1. The control block must be tightened to make sure it won't be broken or damage during the vehicle running.
2. The control block should not be painted.
Air-pipe installation as below:
Products Features
a. Name: Pneumatic Control Block
b.Air hose diameter:6mm
c.Working pressure:0.5-0.8 MPa
d.Temperature range:-20-+50
Fuel Tanker Pneumatic Plastic ControlBlock
1. Connecting Air Pipe Diameter: 6mm
2. Working Pressure: 0.5~0.8Mpa
3. Working Temperature : -30ºC`~+70ºC
Notes:
1. The control block must be tightened to make sure it won't be broken or damage during the vehicle running.
2. The control block should not be painted.
Air-pipe installation as below:
Products Features
a. Name: Pneumatic Control Block
b.Air hose diameter:6mm
c.Working pressure:0.5-0.8 MPa
d.Temperature range:-20-+50
Fuel Tanker Pneumatic Plastic ControlBlock
Features
1. Emergency Exhausting Design
When the tanker truck is in high temperature condition, the manhole will automatically exhaust the air inside to release the
pressure, ensuring the safety of the tanker.
2. With P/V Vent inside
When there is pressure differences inside and outside the tanker, it will automatically inlet or exhaustair to adjust the pressure so that it can ensure
the safety and environmental preotection.
3. Secondary Open Design
When open the up binder plate, it will release the pressure out to prevent the workers from pushing over.
4. Blinding Holes Design
In the main plate of the Manhole, there are three blinding holes can be installed with Vapor Vent Valve,Optic Sensor, DIP Tube orexernal Vacuum
Valve according to the user's demand.
Send Message
