Multi-functional 4G Vehicle Tracker MV501G with 1000mAh Battery
Specifications
| Device Information | Brand | MiCODUS |
| Model | MV501G | |
| Dimensions | 31(L) x 31(W) x 57(H)mm | |
| Weight | 53g | |
| Backup Battery | 80 mAh Li-ion Polymer Battery | |
| Working Parameters | Working Voltage | 10-40V DC |
| Standby Power | 0.036w | |
| Working Power | 0.6w | |
| Working Temperature | -20ºC-75ºC | |
| Working Humidity | 10%-85%RH non-considering | |
| Celluar Parameters | Working Freqency | 2G GSM/GPRS 850/900/1800/1900Mhz |
| SIM Card | Nano SIM | |
| Celluar Antenna | Built-in | |
| GNSS Parameters | Positioning Type | GPS+GLONASS+LBS |
| Position Accuracy | 5-10m (under sky with good gps signal) | |
| GPS Channels | 64 | |
| Tracking Sensitivity | -162 dBm | |
| Cold Start | <=32s | |
| Hot Start | <=1s | |
| GPS Antenna | Built-in | |
| External Interfaces | ACC, SOS, Microphone, Fuel Sensor, Temperature Sensor, Camera | |
4G LTE CAT1+2G GSM
Realtime Tracking
Historical Route Playback
Engine Start/Flameout Alarm
Remotely Cut Off/Resume Fuel
SOS Emergency Call
Voice Monitor
Multiple Anti-theft Alarms
Main Functions:
1. 4G LTE CAT1+2G GSM
2. Wide Operating Voltage 9-95V DC, compatible with all vehicles on the market!
3. Remotely Cut Off & Resume Fuel
Once your vehicle was stolen or meet any emergency, you will can remotely cut off the fuel via SMS command or APP to stop the vehicle, of course you also can resume the fuel remotely.
4. GPS+GLONASS+LBS Triple Positioning Ways
If the gps signal is good, the device will locate via gps satellite, if not, the device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy is 100-1000 meters!
5. Realtime Tracking
You will can realtime track the device on google maps via mobilephone, tablet and computer, and the minumum data upload interval is 10 seconds!
6. History Route Playback
The APP and web server can record the upload data of the device up to 6 months, you will can playback the history route at any time!
7. Power Saving Mode
The device will go into standby mode automatically when there isn't vibration for 3 minutes , it will go into working mode when it detect vibration again
8. Overspeed Alarm
This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message ldquospeed alarm!rdquo to the admin number every 5 minutes.
9. Shake Alarm
After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS ldquosensor alarm!rdquo to the admin number when the unit get shocked.
10. Movement Alarm
When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this command "move+passord", then in case the device moved 500m it will send alarm SMS "Move Alarm+Latitude and longitude" to the authorized number.
11. Virtual Fence
Set up a virtual fence for the tracker to restrict its movements within a district. The unit will send alarm information to APP and web server when it goes out of or get in this district.
12. Sleep Mode
13. Illegal Cutting Line Alarm Under arm mode, if someone cut the wires of the device, you will can get alarm information from the device
14. LIFETIME FREE WEB TRACKING SOFTWARE AND MOBILE APP !
