Mini Waterproof Motorcycle Tracker Xt-007 Background Voice Surveillance Acc, Oil Detection Built-in Flash Memory Sos GPS Tracker
Products Overview:
XT-007G is a waterproof multi-functional and hybrid GPS/GPRS tracker
for vehicle, motorcycle and personal.
Features and Functions:
Water resistance (IP67)
Built-in GPS & GSM antenna (external GPS antenna optional)
SMS/GPRS (TCP/UDP) communication
SMS/GPRS tracking (support TCP & UDP, http is ready soon)
Real time tracking
Track by interval/demand
Background voice surveillance
Two way communication(optional)
Power saving mode
SOS alarm
ACC detection
Oil detection
Remote fuel/engine cut off
Geo-fencing alarm
Over speed alarm
Motion sensor
Low power warning
Built- in backup battery
External power cut off alarm
Remove off tracker alarm
"No GPS" signal warning
Data logger (built-in 8M flash memory)
Support FOTA (firmware on the Air)
For Your Safety:
Read these simple guidelines. Not following them may damage to the device or not perform proper function of application.
Correct Connection | When connecting with other device, read carefully its manual so as to carry out correct installation. Do not connect it to other incompatible devices.
|
Chosen Accessories | Use our chosen accessories to avoid damage to XT-007.
|
Hidden Installation | In order to avoid damage by external force intentionally, please install XT-007 in a hidden place.
|
Protect from blasting | Follow related restrictions. Do not use XT-007 when blasting is in progress.
|
Repair and service | Only qualified engineer with technical support can repair XT-007.
|
Water resistance | XT-007 is water resistant (close to IP67). |
Characteristics:
Items | Specification | |
Power Supply | DC 7-24V/3A | |
Backup Battery | Rechargeable 820 mAh battery (3.7V), | |
Normal Power Consumption | 50mA/h | |
Working Time | normal vehicle & personal mode | 9.5 hours (GPRS interval: 40 seconds) |
personal long standby mode | 13 hours (GPRS interval: 40 seconds) | |
Dimension | 88*50*20MM | |
Weight | 87g | |
Operating Temperature | Built in battery -25°C to +60°C standard(-40°C w/optional battery) | |
Humidity | 5% to 95% Non-condensing | |
GSM Module | Quad Band GSM 850/900/1800/1900Mhz | |
GPS Chipset | Newest GPS SKYTRAQ Chipset | |
GPS Sensitivity | -165 dB | |
GPS Frequency | L1 1575.42MHz | |
C/A Code | 1.023 MHz chip rate | |
Channels | 65 channel all-in-view tracking | |
Position Accuracy | < 5 M CEP | |
Velocity Accuracy | 0.1 M/S | |
Time Accuracy | 1 us synchronized to GPS time | |
Reacquisition | 0.1 ms | |
Hot Start | 1 sec., average | |
Cold(warm) Start | 29 sec., average | |
Altitude Limit | 18,000 meters (60,000 feet) max. | |
Velocity Limit | 514 meters/second (1000 knots) max. | |
Acceleration Limit | Less than 4g | |
LED | 3 LED lights to show power(red), GPS(yellow), GSM(blue). | |
Button | SOS button for making phone SOS calls and sending SOS SMS | |
Interface | 2 digital outputs; 3 digital inputs; 2 analog inputs. | |
Red LED- Power | ||||
Always on | Charging | |||
1s on and 3s off | Normally work | |||
Blue LED- GSM | ||||
0.3s on and 0.3s off | GSM module initializing | |||
Always on | GSM module can't register network | |||
1s on and 3s off | GSM module is registered network | |||
0.1s on and 3s off | GSM module is registered network and GPRS function works well | |||
Orange LED- GPS | ||||
0.3s on and 0.3s off | GPS module initializing | |||
1s on and 3s off | GPS module works well, but GPS position is not fixed | |||
0.1s on and 3s off | GPS module works well and GPS position is fixed | |||
Buttons | ||||
SOS Button | Press it for 3 seconds to make a call and/or send a SMS to authorized numbers. | |||
Other connectors | ||||
Switch | Turn on/off device | |||
GPS Antenna interface | Built-in GPS antenna, external GPS antenna (optional) | |||
SIM Card Holder (Inside) | Insert SIM card here | |||
Mini USB Port | Used for charging, firmware update, configuration on PC | |||
Input/Output Interface | ||||
Distinguish the inputs and outputs from color | ||||
Color | PIN | Function | ||
Red(thick) | VCC | DC In (power input) Input voltage: 7.5V ~ 24V/3A | ||
Black | GND | Ground | ||
Green | OUT1 | Relay output 1 | ||
Yellow | OUT2 | Relay output 2 | ||
Blue | AIN1 | Analog input 1 (input voltage: 0 ~ 3V), normally use for Fuel Detection. | ||
Grey | AIN2 | Analog input 2 (input voltage: 0 ~ 3V) | ||
Red(thin) | SOS | To connect the SOS button | ||
Brown | IN1 | Digital input 1 (positive triggering) | ||
White | IN2 | Digital input 2 (positive triggering) | ||
Purple | ACC | Digital input 3 (positive triggering), normally use for Ignition Detection. | ||
Pink | SPK+ | Speaker | ||
