Model NO.
PFS
Material
Metal
Output
Switching Sensor
Usage
Liquid Level Sensor
Theory
Magnetic Sensor
Trademark
ouke
Specification
CE
Origin
China
On-line installation, mechanical type flow switch, applied for liquid or gaseous medium.
Solid plastic, aluminum or stainless steel shell is selectable.
Minimal pressure loss, good repeatability, anti-pollution, mechanical and electronic parts Are separated, with scale settings. LED display, applied on industrial automation/ Mechanical equipment / air compressed industrial / refrigeration and air conditioning.
Features
1,On-line installation
2,Mechanical type flow switch
3, Suitable for gas and liquid
4,Firm plastic, aluminum or stainless steel housing
5,Small pressure loss 6,Good repeatability and stain resistance
7,The mechanical part isolate from the electric part totally , it is economical type and suit for small flow range.
8, 3 times piston journey respond to original FE20 , which makes sure the high accuracy .
9, With switch setting scale ,so the used does not need to set in field .
10, LED display the switch state (option: double switch value output) .
Applications
Used for gas and liquid. Suitable for industrial automation / mechanical equipment/compressed air industry /refrigeration and air conditioning.
Dimensions
Technical parameters
| Technical parameters | |||||||||||||
| Setting range | Please see the table below | ||||||||||||
| Accuracy | ±5%FS | ||||||||||||
| Hysteresis | Depending on switch point,minimum 0.5L/Min | ||||||||||||
| Connecton type | M12 install Plug-in unit | ||||||||||||
| Output | Tongue tube switch,capability 24VDC/250VAC,100mA | ||||||||||||
| Withstand pressure | 50 bar (Al), 100 bar (Stainless steel) | ||||||||||||
| Average pressure loss | 0.3bar(25L/min) | ||||||||||||
| Medium temperature | Highest 90ºC | ||||||||||||
| Protection class | IP65 (IP68 optional) | ||||||||||||
| P10N..GP Material | Housing : POM plastic | ||||||||||||
| Piston : POM plastic | |||||||||||||
| Spring : Stainless steel | |||||||||||||
| Seal : NBR | |||||||||||||
| P10N..GA Material | Housing : Anodic alumina | ||||||||||||
| Piston : POM plastic | |||||||||||||
| Spring : Stainless steel | |||||||||||||
| Seal : NBR | |||||||||||||
| P10N..GK Material | Housing : Stainless steel | ||||||||||||
| Prison : POM Plastic | |||||||||||||
| Spring : Stainless steel | |||||||||||||
| Seal : NBR | |||||||||||||
| Parameter Table | |||||||||||||
| Type | Pressure (bar) | Maxest flow L/min(water) | Adjustablerange L/min (water) | G(mm) | L(mm) | H(mm) | B(mm) | X(mm) | Weight (kg) | ||||
| Anodic alumina (Stainless steel) | P10N-008..A(k)008.. | 50(100) | 40 | 0.6(0.1)..7(6.5) | G1/4 | 93 | 36 | 30 | 12 | 0.22(0.53) | |||
| P10N-010..A(k)008.. | 50(100) | 40 | 0.6(0.1)..7(6.5) | G3/8 | 93 | 36 | 30 | 15 | 0.20(0.51) | ||||
| P10N-015..A(k)008.. | 50(100) | 40 | 0.6(0.1)..7(6.5) | G1/2 | 93 | 36 | 30 | 15 | 0.18(0.48) | ||||
| P10N-020..A(k)008.. | 50(100) | 40 | 0.6(0.1)..7(6.5) | G3/4 | 105 | 36 | 35 | 15 | 0.23(0.65) | ||||
| P10N-025..A(k)008.. | 50(100) | 40 | 0.6(0.1)..7(6.5) | G1 | 105 | 36 | 40 | 15 | 0.32(0.82) | ||||
| P10N-008..A(k)015.. | 50(100) | 40 | 1(0.5)..12.5(11) | G1/4 | 93 | 36 | 30 | 12 | 0.22(0.53) | ||||
| P10N-010..A(k)015.. | 50(100) | 40 | 1(0.5)..12.5(11) | G3/8 | 93 | 36 | 30 | 15 | 0.20(0.51) | ||||
| P10N-015..A(k)015.. | 50(100) | 40 | 1(0.5)..12.5(11) | G1/2 | 93 | 36 | 30 | 15 | 0.18(0.48) | ||||
| P10N-020..A(k)015.. | 50(100) | 40 | 1(0.5)..12.5(11) | G3/4 | 105 | 36 | 35 | 15 | 0.23(0.65) | ||||
| P10N-025..A(k)015.. | 50(100) | 40 | 1(0.5)..12.5(11) | G1 | 105 | 36 | 40 | 15 | 0.32(0.82) | ||||
| P10N-015..A(k)028.. | 50(100) | 40 | 2(0.8)..24(22) | G1/2 | 93 | 36 | 30 | 15 | 0.18(0.48) | ||||
| P10N-020..A(k)028.. | 50(100) | 40 | 2(0.8)..24(22) | G3/4 | 105 | 36 | 35 | 15 | 0.23(0.65) | ||||
| P10N-025..A(k)028.. | 50(100) | 60 | 2(0.8)..24(22) | G1 | 105 | 36 | 40 | 15 | 0.32(0.82) | ||||
| P10N-020..A(k)060.. | 50(100) | 100 | 27(21)..70(66) | G3/4 | 105 | 36 | 35 | 15 | 0.23(0.65) | ||||
| P10N-025..A(k)008.. | 50(100) | 100 | 27(21)..70(66) | G1 | 105 | 36 | 40 | 15 | 0.32(0.82) | ||||
| Selection Table | |||||||||||||
| P10N- | 008 | G | D | A | 15 | Q | 1 | Details | |||||
| P10N- | P10N series Piston flow switch | ||||||||||||
| 008 | Thread interface G1/4 | ||||||||||||
| 010 | Thread interface G3/8 | ||||||||||||
| 015 | Thread interface G1/2 | ||||||||||||
| 020 | Thread interface G3/4 | ||||||||||||
| 025 | Thread interface G1 | ||||||||||||
| G | Internal thread | ||||||||||||
| D | 24V±20%DC power supply | ||||||||||||
| W | 230V±15%AC power supply | ||||||||||||
| P | Plastic Housing | ||||||||||||
| A | Anodic alumina Housing | ||||||||||||
| K | Stainless steel housing | ||||||||||||
| 008 | setting range:0.6-7L/min | ||||||||||||
| 015 | setting range:1-12.5L/min | ||||||||||||
| 028 | setting range:2-24L/min | ||||||||||||
| 070 | setting range:27-70L/min | ||||||||||||
| Q | M12 install plug-in unit | ||||||||||||
| 1 | one switch point output | ||||||||||||
| 2 | two switch point output | ||||||||||||
