Model NO.
21703
Product Name
Manual Paddle Valve Switch
Application
Car Air Ride Suspension
Max Current
20.0mA
Max Voltage
12V DC
Max Working Pressure
200psi
MOQ
10PCS
Port
Ningbo
Key Words
Air Lift Paddle Switch
Transport Package
Vpc Logo Standard Cartons/Customer′s Designed Pack
Specification
0.026kg
Trademark
VPC/no brand
Origin
Ningbo, China
HS Code
8481802190
Production Capacity
5000000000/Year
Material:
Plastic
Certification:
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Car Make:
Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
Position:
Rear
OEM:
Yes
Type:
Suspension Spring
Features:
1,The manual paddle valve is a simple way of inflating your airbags from an air source.
2,Simply connect an air supply line into the valve, and a delivery line back out to the airbag.
3,This Electric version has a built in ON/OFF switch that can turn your compressor relay on at the same time you open the valve to inflate.
4,They have 1/4" barb fittings for easy leak free connections
5,A simple, cheap alternative to electric solenoid valves.
6,Works with air suspension, truck seats, or industrial.
7,Easy to mount into a dash or steel panel.
1,The manual paddle valve is a simple way of inflating your airbags from an air source.
2,Simply connect an air supply line into the valve, and a delivery line back out to the airbag.
3,This Electric version has a built in ON/OFF switch that can turn your compressor relay on at the same time you open the valve to inflate.
4,They have 1/4" barb fittings for easy leak free connections
5,A simple, cheap alternative to electric solenoid valves.
6,Works with air suspension, truck seats, or industrial.
7,Easy to mount into a dash or steel panel.
Paddle valve switch with 1/4" barb fittings, just run one line from your air tank and the other line to your bags. You can mount these anywhere, they are easily snapped in or push in two tabs to remove.No electrical hookup needed. Save tons of money by not having to buy solenoids. 2 of these needed for a front/back system or 4 for a 4 path. Each Paddle does up and down Check other auctions for mounting panels with these paddles installed with a gauge. These will take a full size car from all the way down to all the way up in less then 10 seconds.
Manual Paddle Valve Switch for Air Suspension Air ride Control
| Port Size: | (2) 3/16" Barbs |
| Primary Vehicle Application: | Bostrom |
| Name | 21703 Manual Paddle Valve Switch with 1/4" barb fittings |
| Note: | Primary seat application |
Item Overview:
- Valves control air ride truck seats and lumbar supports.
- Available in push/pull and paddle type configurations.
- Spring-loaded, three-way function.
- Electro-pneumatic combination valve designed to operate air seats using an electric air compressor.
- Designed to replace valves on seats by major manufacturers such as Bostrom, National and Sears.
Send Message
