Model NO.
DO90305
Type
Auto Meter
Kind
Dashboard Gauge
Throttle Position Sensor Type
Not
Crankshaft Position Sensor Type
Hall Effect Type
Speedometer Type
Electronic
Tachometer Type
Electronic
Voltage Meter Structure Type
Not
Fuel Meter Type
Electromagnetic
Knock Sensor Type
Not
Installation Method
Combined Type
Patent
ISO9001,CE
Trademark
SINNCO TECH
Transport Package
30*25*11cm
Specification
1.2KG
Origin
China
HS Code
8708299000
Brand | SINCO TECH |
Name | DO903 OBD DASHBOARD |
Display | Digital |
Operating Voltage | 9V-16V |
Application | Vehicle that meets the OBDII standards |
Part List | Display, Power Wire, Bluetooth OBD unit, Instructions manual |
Parameter Display | 1. RPM(9000) 2. Speed 3. Fuel Level Input (%) 4. Absolute Throttle Position (%) 5. Calculate Load Value (%) 6. Engine Coolant Temperature (ºC) 7. Voltage (V) 8. Time 9. Bottom display |
Bottom Display
| 1. Date 2. Engine Rpm(RPM) 3. Intake Manifold Absolute Pressure(MAP) 4. Air Flow Rate From MAF(MAF) 5. Intake Air Temperature(IAT) 6. Ignition Timing Advance For 1#Cylinder(ITA) |
the actual price,Please enquire
RPM ITA MAP IAT multi display race car dashboard for on board diagnostic II cars
Brand: SINCO TECHModel: DO903
SINCOTECH Do903 gauge contains a display , a power wire and a bluetooth OBD unit.it is universal used for all 12v OBD II cars, it is easily installed, plug-and-play.
Bluetooth between display and OBD module can be connecting automatically to inter into main display .
Display and Bluetooth OBD module are paired, the default Bluetooth pairing code on the display is 0000. When connecting to a Bluetooth OBD module whose pairing code isn't 0000, the pairing code on the display must be changed to correspond.
the backlight change automatically via environment , it is with a low consumption LCD screen.
Bluetooth between display and OBD module can be connecting automatically to inter into main display .
Display and Bluetooth OBD module are paired, the default Bluetooth pairing code on the display is 0000. When connecting to a Bluetooth OBD module whose pairing code isn't 0000, the pairing code on the display must be changed to correspond.
the backlight change automatically via environment , it is with a low consumption LCD screen.
