Model NO.
183
Sound Frequency
Mid Pitch
Voltage
12V
Connection Mode
Single Wire
Current
3A
Contact Point
Without Contact Point
Energy Exchanging Mechanism
Electrical
Transport Package
Package
Specification
165mm
Trademark
yiyelang
Origin
China
Production Capacity
5000/Month
After-sales Service:
One Year
Warranty:
One Year
Type:
Electric Horn
Speaker Design:
2-way
Shape:
Basin-shaped
Material:
Iron
- Parameter Information:
- Signal To Noise Ratio: 89dB
- Out Power: 1000W
- Subwoofers Types: Enclosed Subwoofer Systems
- RMS: 100W
- Material Type: Aluminum Alloy
- Voltage: 12V
- Frequency Range (Hz): 20Hz-250KHz
- Impedance: 4Ω
- Item Size: Does not apply
- Audio Sensitivity: 89dB
- Color: Black
- Special Features: None
- Specifications:
- Features :
- Digital Integrated Chip + 4 Pairs of Tube Boost:Low power consumption and high output.
- Pure Aluminum Heat Sink + Aluminum Control Panel:good thermal conductivity.
- Bronze copper with magnetic inductance to enhance the adsorption force. -Installed with current overload, short circuit, thermal overload, DC offset.
- High power operation can give you a wonderful in-car entertainment and a great hearing enjoyment.
- Light weight, handy and easy to install.
- Six large capacitors, releasing power is more stable.
- With switch, volume adjustable.
- Color:Black
- Weight: 810.5g
- Size: 212 x 175 x 52mm
- THD: < 0.01%
- Installation:
- Speaker connection: amplifier board has a good piece of red and black wire welding can be accessed by a 4-8 Euro 100-150W bass or full range speaker or speakers (red pick horn + , black pick speaker - is recommended to use 4 ohm 8-12 inch 45 core 100-170 magnetic bass ).
- Power connection:
A. If Car has a CD player : GND then negative vehicle power , 12V power supply connected to the car positive , REM CD player connected to the control line (so the CD player can directly control the subwoofer amplifier on and off ).
B. If car no CD player : GND connected to the negative power of the car , + 12V and REM connected together in positive 12V car power (12V can also be an indirect one with REM switch control amplifier switching function ).
C. If directly with the battery connection : GND connect the battery negative , + 12V and 12V REM then the positive battery simultaneously.
- Product Weight : 811 G / 28.61 Ounces
- Product Dimensions (L*W*H) : 212*175*52 MM / 8.35*6.89*2.05 Inches
- Package Weight : 850 G / 29.98 Ounces
- Package Dimensions (L*W*H) : 212*175*52 MM / 8.35*6.89*2.05 Inches
- Retail Packaging: No, No Packing
- Package Include:
- 1 x Amplifier Board
-602
- Rubber Edge Injection Basin Bass: 167 mm x 167 mm
- Installation depth: 56 mm
- Power Handing: 160Watts(max)-80Watts (nom)
- Distortion: Less Than 1%
- Note :
- Please confirm the specifications before purchase, so as not to cause unnecessary trouble.
- The reconfiguration process is not connected properly will have a murmur and buzz.
- The actual power of the loudspeaker itself is not very large, the loudspeaker sounds very loud will have a murmur and buzz.
- Without the power amplifier installed, the sound of the host is not good and the power is not good,the loudspeaker sounds very loud will have a murmur and buzz.
- Product Weight : 372 G / 13.12 Ounces
- Product Dimensions (L*W*H) : 162*165*56 MM / 6.38*6.50*2.20 Inches
- Package Weight : 360 G / 12.70 Ounces
- Package Dimensions (L*W*H) : 170*170*60 MM / 6.69*6.69*2.36 Inches
- Retail Packaging: Yes, Colored Box
Send Message
