Norgren PM/31062 6''×2 Fire-stone W01-R58-4070 Double Convoluted Industrial Air Springs
Cross Reference
NorgrenPM/31062
NorgrenPM 31062
NorgrenPM31062
Fire-stone W01-R58-4070 - (6 x 2 Alu )
Fire-stone W01R584070 - (6 x 2 Alu )
Fire-stone W01 R58 4070 - (6 x 2 Alu )
Dunlop Part NO.6"x2
Specifications and Detailed Technical Parameters: Norgren PM/31062
Nut/blind nut
Top plate screw (nut) teeth: 4×M8
Screw (nut) teeth of the bottom cover plate: 4×M8
Air hole/air inlet/air fittings
Air hole/air inlet: G1/2
Rubber Bellows
Top plate diameter (width): 153.5 mm
Diameter (width) of the bottom cover plate: 153.5 mm
Material top and bottom plate: aluminum
Bell rubber bellows
Maximum diameter at 7 bar: 178mm
Rubber bellows stroke: 80mm-195m
Bumper block/bumper block
Without bumper block
Belt loop/Girdle hoop/Girdle ring
One piece of belt loop/girdle hoop/girdle ring
| Type | Order No. |
| CR Rubber bellows only | 6×2 |
| with aluminum plates, G1/2 air inlet | PM/31062 |
Min. pressure: 0 bar
Return force to min.height: ≤180N
Overall weight with clamped plates: 1.8kg
Vibration isloation-dynamic characteristic values
Design height H: recommended 160mm, minimum 150mm
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Force (Load) [KN] | 2.6 | 3.5 | 4.5 | 5.5 | 6.5 | 7.6 | 2.0 |
| Spring rate [N/cm] | 675 | 855 | 1035 | 1215 | 1395 | 1570 | |
| Natural frequency [Hz] | 2.5 | 2.4 | 2.4 | 2.3 | 2.3 | 2.3 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 160 | 2.6 | 3.5 | 4.5 | 5.5 | 6.5 | 7.6 | 2.0 |
| 140 | 3.3 | 4.5 | 5.6 | 6.8 | 8.1 | 9.3 | 1.7 | |
| 120 | 3.9 | 5.2 | 6.6 | 8.0 | 9.4 | 10.8 | 1.5 | |
| 100 | 4.6 | 6.2 | 7.8 | 9.4 | 11.1 | 12.8 | 1.2 | |
Other types we could offer
| Model No. | PM/31021 | PM/31022 | PM/31023 | PM/31041 | PM/31042 | PM/31043 | PM/31061 | PM/31063 | PM/31081 | PM/31082 | PM/31091 | PM/31092 |
| Air Inlet | G1/4 | G1/4 | G1/4 | G3/8 | G3/8 | G3/8 | G1/2 | G1/2 | G3/4,G1/4 | G3/4,G1/4 | G3/4,G1/4 | G3/4,G1/4 |
| Teeth | 2×M6 | 2×M6 | 2×M6 | 3×M6 | 3×M6 | 3×M6 | 4×M8 | 4×M8 | 2×M8 | 2×M8 | 2×M8 | 2×M8 |
| Rubber Bellows max. diameter | 80mm | 80mm | 80mm | 125mm | 125mm | 125mm | 175mm | 178mm | 215mm | 220mm | 250mm | 250mm |
| Cover plate diameter | 78mm | 78mm | 78mm | 110mm | 110mm | 110mm | 152.5mm | 152.5mm | 141mm | 135mm | 161mm | 161mm |
| Required installation space | 95mm | 95mm | 95mm | 140mm | 140mm | 140mm | 190mm | 195mm | 230mm | 235mm | 265mm | 265mm |
The related picture of PM/31062
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
