FS70-7 CI G1/4CA Continental Fes-to EB 165 65 Jack Airbag
Cross reference
Cotitech FS 70-7
Cotitech FS70-7
Cotitech FS 70 7
Cotitech FS70 7
FS 70-7 CI G 1/4 CA Continental
FS 70 7 CI G 1/4 CA Continental
FS70-7CIG1/4CA Continental
Weforma WBE 200-E1
Weforma WBE 200 E1
Weforma WBE200-E1
Weforma WBE200 E1
Weforma WBE200E1
Phoenix SP 1 B 05
Phoenix SP 1B 05
Phoenix SP1 B 05
Phoenix SP1B 05
Phoenix SP1B05
Bos-ch 82241900
Fes-to EB-165-65
Fes-to EB 165 65
Fes-to EB165 65
Fes-to EB16565
Specifications and Detailed Technical Parameters:AIRSUSTECH 1B7070
Nut/blind nut
Top plate screw (nut) teeth: 2XM8x1.25
The screw center distance of the top cover plate: 44.5mm
Screw (nut) teeth of the bottom cover plate: 2XM8x1.25
The screw center distance of the bottom cover plate: 44.5 mm
Air hole/air inlet/air fittings
Air hole/air inlet: G1/4
The air inlet is in the middle of the screw center
Cover plate
Top plate diameter: 105 mm
Diameter of the bottom cover: 105 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 165 mm
Natural diameter of rubber bellows: 150 mm
Required installation diameter: 180mm
Working stroke: 65mm
Maximum height: 115 mm
Minimum height: 50 mm
Bumper block/bumper block
No bumper block
Belt loop/Belt loop/Girdle hoop
With belt loop: Without
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 1.2kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 90mm, minimum 70mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 2.7 | 3.7 | 4.7 | 5.7 | 6.6 | 7.7 | 0.9 |
| Spring rate [N/cm] | 1040 | 1270 | 1530 | 1770 | 2060 | 2325 | |
| Natural frequency [Hz] | 3.1 | 2.9 | 2.9 | 2.8 | 2.8 | 2.7 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 100 | 2.2 | 3.1 | 4.0 | 4.8 | 5.7 | 6.6 | 1.0 |
| 90 | 2.7 | 3.6 | 4.6 | 5.6 | 6.5 | 7.5 | 0.9 | |
| 80 | 3.1 | 4.1 | 5.1 | 6.2 | 7.3 | 8.3 | 0.8 | |
| 70 | 3.4 | 4.5 | 5.6 | 6.7 | 7.9 | 9.0 | 0.7 | |
| 60 | 3.6 | 4.8 | 6.0 | 7.2 | 8.4 | 9.5 | 0.6 | |
| Model Size | Net Weight(kg) | Gross Weight(kg) | Box Weight(Kg) | Box Size(cm) | Packing quantity |
| 1B7070 | 1.378 | 17.116 | 0.58 | 33*33*22 | 12 |
1. Daily maintenance
The air bag jack requires almost no daily maintenance work. When not in use, just place the air bag in a cool and dry environment.
2. Use environment
Because of its good integrity and smooth and dry surface, the airbag jack can avoid this problem very well.
3. Device protection mechanism
One of the advantages of the air bag jack is that when inflated, the air bag can not only expand longitudinally, but also slightly expand laterally. If the heavy object is prevented from rising, the air bag can only expand laterally when inflated, allowing the operator to find out in time. Abnormal lifting, deal with faults, and avoid damage to lifting objects.
4. Device response speed
The air bag jack uses an air pump to inflate, and the relevant parameters can be set to work quickly and stably. It does not require personnel to be very close to the front line to operate, and the high response speed can also ensure the safety of personnel.
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
