Power
0.015kw-200kw
Ratio
1, 1.5, 2, 3
Transport Package
Wooden Case
Specification
SGS, ISO9001
Trademark
NGC
Origin
China
HS Code
8483109000
Production Capacity
200/Month
Application:
Machinery
Function:
Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:
Planetary
Hardness:
Hardened Tooth Surface
Installation:
Flange Mounted/ Shaft Mounted etc
Step:
Four-Step
P Series Planetary Gear box/gear unit
Model No.: P2NA,P2NB,P2NC,P2ND,P2SA,P2SB,P2SC,P2SD,P2LA,P2LB,P2LC,P2LD,P2KA,P2KB,P2KC,P2KD,
P3NA,P3NB,P3NC,P3ND,P3SA,P3SB,P3SC,P3SD,P3LA,P3LB,P3LC,P3LD,P3KA,P3KB,P3KC,P3KD,
Application industries:
widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping,
lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and
other regions.
Technique data:
P:0.4-9551kW
i:25-4000(imax:138000)
T2N:22000-1920000N.m
Features
1). Modular design, variable combination with other Series as required
2). Housing material: nodular cast iron, better rigidity and better anti-vibration capability
3). Carburize hardening of sun, planet, pinion and bevel gears to achieve high rigidity
and good wear resistance, all teeth ground after heat treatment, thus noise reduced and
the gear units efficiency and lifetime enhanced
Advantages
a) Product advantages: high modular design, making all the series apply fewer components, it can
conveniently equip electric motor or other driving forces of various types.
b) The cabinet applies integral and high-strength casting mode, which has high rigidity and vibration
resistance performance.
c) The gear unit applies low-carbon alloy steel quenching gear grinding process and shape-correction
technology, making the products have larger bearing capacity. The operation is reliable, which can
decrease noise and improve efficiency. Transmission ratio is divided into details, the scope is wide.
Combined type can obtain larger transmission ratio.
d) Gear unit is appropriate to be mounted at any space and any angle.
Our factory:
Model No.: P2NA,P2NB,P2NC,P2ND,P2SA,P2SB,P2SC,P2SD,P2LA,P2LB,P2LC,P2LD,P2KA,P2KB,P2KC,P2KD,
P3NA,P3NB,P3NC,P3ND,P3SA,P3SB,P3SC,P3SD,P3LA,P3LB,P3LC,P3LD,P3KA,P3KB,P3KC,P3KD,
Application industries:
widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping,
lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and
other regions.
Technique data:
P:0.4-9551kW
i:25-4000(imax:138000)
T2N:22000-1920000N.m
Features
1). Modular design, variable combination with other Series as required
2). Housing material: nodular cast iron, better rigidity and better anti-vibration capability
3). Carburize hardening of sun, planet, pinion and bevel gears to achieve high rigidity
and good wear resistance, all teeth ground after heat treatment, thus noise reduced and
the gear units efficiency and lifetime enhanced
Advantages
a) Product advantages: high modular design, making all the series apply fewer components, it can
conveniently equip electric motor or other driving forces of various types.
b) The cabinet applies integral and high-strength casting mode, which has high rigidity and vibration
resistance performance.
c) The gear unit applies low-carbon alloy steel quenching gear grinding process and shape-correction
technology, making the products have larger bearing capacity. The operation is reliable, which can
decrease noise and improve efficiency. Transmission ratio is divided into details, the scope is wide.
Combined type can obtain larger transmission ratio.
d) Gear unit is appropriate to be mounted at any space and any angle.
Our factory:
| Output speed | 0.19-60r/min |
| Output torque | Up to 2600000N.m |
| Power | 0.4-12934kw |
| Mounting type | Foot-mounted |
| Flange-mounted | |
| Output shaft design | Hollow shaft with shrink disk |
| Hollow shaft with involute splines(DIN) | |
| Hollow shaft with involute splines(GB) | |
| Solid shaft with parallel key | |
| Solid shaft with involute splines(DIN) | |
| Solid shaft with involute splines(GB) |
Send Message
