Model NO.
KMPS/KMP
Type
Gearbox
Warranty
12 Months to 18 Months
Flender
Origin or Equivalent
Deliever
1 to 3 Months
Manufacturing Method
Gear Grinding
Toothed Portion Shape
Helical
Transport Package
Wooden Cartons
Specification
SGS, ISO9001
Trademark
Flender/NGC
Origin
Nanjing
HS Code
8483409000
Production Capacity
10 Set Per Year
Application:
Machinery
Function:
Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:
Planetary
Hardness:
Hardened Tooth Surface
Installation:
Vertical Type
Step:
Four-Step
Flender vertical mill planetary gearbox(kmps/kmp)
Application:Loesche Raw Mill,roller grinding mill,cement mill etc
Vertical Mill Drive
Bevel Planetary Gear Units
Types KMP and KMPS
Description
(1) Bevel gear stage, case hardened with Cyclo-Palloid HPG or ground gear teeth.
(2) Sun gear, case hardened and ground.
(3) Planet gears, case hardened and ground and supported in self-aligning roller bearings.
(4) Internal ring gear out of high-alloy quenched and tempered steel, teeth produced by hobbing or shaping.
(5) Load distribution by the self-aligning sun gear which is connected with the bevel gear shaft through a doublejointed gear coupling.
(6) One-piece planet carrier with shaft out of nodular graphite cast iron.
(7) Thrust load from the mill absorbed by tilting pad thrust bearing. (Description see pages 8 and 9).
(8) Connecting flange out of nodular graphite cast iron. Connection with planet carrier through interference fit, and on large gear units through an additional gear coupling. Assembly and disassembly by means of pressure oil system.
(9) Housing out of fabricated steel or nodular graphite cast iron, heavily ribbed, circular form; thus, passing on the thrust load equally and directly into the housing wall. Solid housing, hence
no leakings.
(10) Shafts supported in rolling bearings; calculated service life at least 80 000 h.
(11) Input shaft and output flange sealed oil- and dustproof with wear resisting labyrinth seals.
On type KMPS, a helical gear stage (case hardened and ground) is fitted
between bevel and planetary gear set.
Application:Loesche Raw Mill,roller grinding mill,cement mill etc
Vertical Mill Drive
Bevel Planetary Gear Units
Types KMP and KMPS
Description
(1) Bevel gear stage, case hardened with Cyclo-Palloid HPG or ground gear teeth.
(2) Sun gear, case hardened and ground.
(3) Planet gears, case hardened and ground and supported in self-aligning roller bearings.
(4) Internal ring gear out of high-alloy quenched and tempered steel, teeth produced by hobbing or shaping.
(5) Load distribution by the self-aligning sun gear which is connected with the bevel gear shaft through a doublejointed gear coupling.
(6) One-piece planet carrier with shaft out of nodular graphite cast iron.
(7) Thrust load from the mill absorbed by tilting pad thrust bearing. (Description see pages 8 and 9).
(8) Connecting flange out of nodular graphite cast iron. Connection with planet carrier through interference fit, and on large gear units through an additional gear coupling. Assembly and disassembly by means of pressure oil system.
(9) Housing out of fabricated steel or nodular graphite cast iron, heavily ribbed, circular form; thus, passing on the thrust load equally and directly into the housing wall. Solid housing, hence
no leakings.
(10) Shafts supported in rolling bearings; calculated service life at least 80 000 h.
(11) Input shaft and output flange sealed oil- and dustproof with wear resisting labyrinth seals.
On type KMPS, a helical gear stage (case hardened and ground) is fitted
between bevel and planetary gear set.
Send Message
