This PTC electric heater is suitable for electric / hybrid / fuel cell vehicles and is mainly used as the main heat source for temperature regulation in the vehicle. The PTC electric heater is applicable to both vehicle driving mode and parking mode. In the heating process, electric energy is effectively converted into heat energy by PTC components. Therefore, this product has faster heating effect than internal combustion engine. At the same time, it can also be used for battery temperature regulation (heating to working temperature) and fuel cell starting load.
| Medium temperature | -40ºC~90ºC |
| Medium type | Water: ethylene glycol /50:50 |
| Power/kw | 5kw@60ºC,10L/min |
| Brust pressure | 5bar |
| Insulation resistance MΩ | ≥50 @ DC1000V |
| Communication protocol | CAN |
| Connector IP rating(high and low votage) | IP67 |
| High voltage working voltage/V (DC) | 450-750 |
| Low voltage operating voltage/V(DC) | 9-32 |
| Low voltage quiescent current | < 0.1mA |
| Baud Rate | 250K/500K |
The PTC electric heater module consists of PTC heating components, controllers and internal pipelines. The heating component is installed in the aluminum die casting, the aluminum die casting and the plastic casing form a closed circulation pipeline, and the cooling liquid flows through the heating body in a meander structure.
The electrical control part is an aluminum die-cast body covered with a metal casing. The controller circuit board is secured with screws and the connector is directly attached to the circuit board. The electrical principle block diagram is shown below:
Hebei Nanfeng Automobile Equipment (Group) Co., Ltd is a group company with 5 factories, that specially produce parking heaters, heater parts, air conditioner and electric vehicle parts for more than 30 years. We are the leading auto parts manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications. Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
