Model NO.
WCT
Own Weight
56kg
Working Time
75~85s
Volt
12V
Control
Remote Control
Transport Package
Wooden Case
Specification
1380*1290*540mm
Trademark
xinder
Origin
Changzhou Jiangsu
HS Code
8708999990
Production Capacity
100set/ Month
Material:
Aluminium
Overall Dimension:
1380*1290*540mm
Loading Capacity:
Wheelchair Weight Less Than 20.5kg
1.Specifications:
Retracted Overall Dimension (L*W*H): 1380*1290*540mm
Cover Shell Extending Length: 930mm
Own Weight: 56Kg
Load Capacity: wheelchair≤20.5Kg
Function: to store the wheelchair in car roof box if wheelchair not used
Purpose: for car, SUV and other vehicles; mainly for the disabled to drive by himself/herself
Working Time: 75~85s to finish the whole process
Materials:
cover shell-----------------glass fiber reinforced plastics
rail---------------------------aluminum alloy 6063-T5
fold and slide parts-------rectangular iron tube and steel plate
Control:remote control
Voltage:12 Vdc
MAX No-load Current: <4A
2. Brief Introduction
The WCT chair topper is installed on the car or van top to store the foldable wheelchair.
The chair topper may be independently remote controlled by the wheelchair occupier himself/herself, no need of other persons' help.
Here we recommend you to choose our turning seat to help the wheelchair occupier to easily get in or out of the car by himself/herself.
The chair topper is driven by the motor-driven chain. Meanwhile, manual backup control system is supported for any emergency.
All the main specifications, installation guide and maintenance method are included in the manual. It is very important to you to read through the manual carefully and fully master the operation steps.
Retracted Overall Dimension (L*W*H): 1380*1290*540mm
Cover Shell Extending Length: 930mm
Own Weight: 56Kg
Load Capacity: wheelchair≤20.5Kg
Function: to store the wheelchair in car roof box if wheelchair not used
Purpose: for car, SUV and other vehicles; mainly for the disabled to drive by himself/herself
Working Time: 75~85s to finish the whole process
Materials:
cover shell-----------------glass fiber reinforced plastics
rail---------------------------aluminum alloy 6063-T5
fold and slide parts-------rectangular iron tube and steel plate
Control:remote control
Voltage:12 Vdc
MAX No-load Current: <4A
2. Brief Introduction
The WCT chair topper is installed on the car or van top to store the foldable wheelchair.
The chair topper may be independently remote controlled by the wheelchair occupier himself/herself, no need of other persons' help.
Here we recommend you to choose our turning seat to help the wheelchair occupier to easily get in or out of the car by himself/herself.
The chair topper is driven by the motor-driven chain. Meanwhile, manual backup control system is supported for any emergency.
All the main specifications, installation guide and maintenance method are included in the manual. It is very important to you to read through the manual carefully and fully master the operation steps.
Send Message
