Model NO.
HY-200
Condition
New
Output Capacity
2 Cbm
Rated Power
76/2200 Kw/Rpm
Max. Torque
360/1400 N.M/Rpm
Transport Package
Container
Specification
6925x2490x2795 mm
Trademark
HONGYUAN
Origin
China
HS Code
87054000
Production Capacity
100units/Month
Certification:
ISO9000, EPA, CE
Transmission Type:
Automatic
Emission Standard:
Euro 4
Fuel:
Diesel
Drive Mode:
6x4
Maximum Horsepower:
>400hp
Self Loading Mobile Concrete Mixer Truck (HY-200)
Equipped with driving camera, automatic water feeding & metering system, electronic water suction pump, etc. The mixing drum can be slewed hydraulically through 270 degrees for high discharge over 1.8m on the four sides of the vehicle. The drum can also be lifted up 20° by two hydraulic cylinders at bottom for the convenience of concrete discharge.
- The vehicle size is small, which is suitable for limited site and widely used in new rural construction, urban construction, tunnel, airport, seaport, high-speed rail site, remote areas where there are no electric power, middle projects, farmer's houses, building, country road, irrigation, reservoir, mine, rural bridges, high-way road etc.
- High strength steel plate, which enhances the load capacity and high stability of vehicle.
- The material of rolling ring and mixing drum adopts 16mn high strength steel which uses forging normalizing manufacturing process.
- Mixing blade is designed with varying pitching angles, which simplifies the feeding device, ensures the speed faster and mixing performance better.
Name | Item | Specification | ||
Net | 6200 KG | |||
Transmission | 4 WD | |||
Brake | Air Brake | |||
Chassis | Off-road | |||
Loader bucket | capacity | 0.4m3 | ||
Control | Hydraulic | |||
Tilt angle | 20% | |||
Speed | High | 0-30KM/H | ||
Low | 0-9KM/H | |||
Mini turning radius | 4.5M/R | |||
Engine | Type | Yunnei 4102 | ||
Rated Power/RPM | 76KW/2200RPM | |||
Max.Torque/RPM | 360N.M/1400RPM | |||
Cylinder | 4 | |||
Starter | Electric | |||
Cooling type | water cooling | |||
Maxing Drum | Output capacity | 2.0M3 | ||
Bank Angle | 16 ° | |||
Chute | Swing Angle | ≥50° | ||
Angle control | Hydraulic | |||
Loader control | Hydraulic 4 way stick |
Send Message